Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sugiyama, Tomoyuki; Fuketa, Toyoshi; Ozawa, Masaaki*; Nagase, Fumihisa
Proceedings of 2004 International Meeting on LWR Fuel Performance, p.544 - 550, 2004/09
Two pulse irradiation experiments simulating reactivity initiated accidents were performed on high burnup (
60 GWd/t) PWR UO
rods with advanced cladding alloys. Test OI-10 was performed on an MDA cladded rod with large-grain (25 
m) fuel pellets with a peak fuel enthalpy condition of 435 J/g, and resulted in a peak residual hoop strain of 0.7%. On the other hand, Test OI-11 on a ZIRLO cladded rod with conventional pellets resulted in a fuel failure at a fuel enthalpy of 500 J/g due to the pellet-cladding mechanical interaction (PCMI). A long axial split was generated on the cladding over the active length. The fuel pellets were fragmented and dispersed into the coolant water. The fuel enthalpy at failure is higher than the PCMI failure criterion of 209 J/g at the corresponding burnup. The experimental results suggest that the rods with improved corrosion resistance have much safety margin against the PCMI failure compared to the conventional Zircaloy-4 rod.
Nagase, Fumihisa; Fuketa, Toyoshi
Proceedings of 2004 International Meeting on LWR Fuel Performance, p.500 - 506, 2004/09
A systematic research program is being conducted at the Japan Atomic Energy Research Institute (JAERI), which aims at a wide range database for evaluating the influence of further burnup extension on fuel behavior under LOCA conditions. As a part of the program, integral thermal shock tests simulating the whole LOCA sequence have been conducted with Zircaloy-4 fuel claddings, irradiated to 39 and 44GWd/t at a PWR. One cladding, oxidized to about 30% ECR, fractured during the quench. The fracture condition agrees with the fracture criteria for non-irradiated claddings that have similar hydrogen concentrations (about 25% ECR). Two claddings, oxidized to about 16 and 18% ECR, survived the quench, indicating that fracture/non-fracture boundary is not reduced so significantly by irradiation for the examined burnup range. The present paper describes information obtained from the tests including oxidation kinetics and rupture behavior.
Ozawa, Takayuki; Abe, Tomoyuki; Ikusawa, Yoshihisa; Maeda, Koji
CD-ROM, 8P., 8 Pages, 2004/00
Focusing on the cover layer materials (as the Radon Barrier Materials), which could have the effect to restrain the radon from scattering into the air and the effect of the radiation shielding, we produced the radon barrier materials with crude bentonite on an experimental basis, using the rotary type comprehensive unit for grinding and mixing, through which we carried out the evaluation of the characteristics thereof.